UNIBELT OPERATING INSTRUCTIONS     Picture   Picture
       
       
      Grasp the running latch plate and slide it up the webbing as far as necessary so that it will be easy to pull across your body.   Pull the webbing, move the running latch plate toward the buckle. This system will not lock up if you stop or hesitate, so relax and continue to "buckle-up".
             
                 
   
Picture   Picture     Picture
     
Push the latch plate into the buckle until a "Click" is heard.   Pull up on the shoulder belt to insure that there is no slack in the lap belt. The lap belt will not tighten during use; therefore you can set it right now to safe, comfortable snugness.   Check the belt slackness. The belt will retain the small amount of slack necessary for comfort when you return to your normal seating position. If the belt is still too tight, pull out 6" or 8" of webbing, let it return to your chest and repeat the above motion.